Engsofts

Sentieon Genomics software is a set of software tools that perform analysis of genomic data obtained from DNA sequencing.The Sentieon Genomics software enables rapid and accurate analysis of next-generation sequence data. The Sentieon® DNAseq pipelines enable germline variant calling on hundreds of thousands of samples simultaneously. The Sentieon® TNseq pipelines enable accurate calling of somatic variants in paired tumor-normal samples or in an unpaired tumor samples. The Sentieon® Genomics software produces more accurate results than other tools on third-party benchmarks with results obtained in one tenth the time of comparable pipelines. Available versions: 202503.01 , 202308.01 , … Sentieon Genomics 2025.03 Linux Tested Picture Release 202503 Type Description Feature Added support for hybrid short and long-read variant calling. Feature Added...

Leica CloudWorx for Bentley is the most efficient and popular plug-in software for using as-built point cloud data – captured by laser scanners – directly within Bentley MicroStation, AECOsim Building Designer and OpenBuildings Designer. Available versions: 2025.x , 2024.x , 2023.x ,… Requirement:Microstation CONNECT Edition V10.16-10.v17 , Microstation 2023-2025 Leica CloudWorx 2025.1 for Bentley 2023-2025 Tested Picture Users take advantage of the familiar Bentley interface and tools to shorten the learning curve for working with laser scan data. Leica CloudWorx let Bentley users efficiently visualise and process large point cloud data sets. Users can create accurate 2D and 3D as-builts, check proposed designs against existing conditions, and perform critical construction & fabrication QA, and more… all directly within Bentley. In...

The Olga dynamic multiphase flow simulator models transient flow (time-dependent behaviors) to maximize production potential. Transient modeling is an essential component for feasibility studies and field development design. Dynamic simulation is essential in deep water and is used extensively in both offshore and onshore developments, to investigate transient behavior in pipelines and wellbores. Transient simulation with the Olga simulator provides an added dimension to steady-state analysis by predicting system dynamics, such as time-varying changes in flow rates, fluid compositions, temperature, solids deposition, and operational changes. Available versions: 2025.1.2 , 2024.2 , 2024.1 , 2023.1 Schlumberger OLGA 2025.1.2 Tested Picture As part of our ongoing commitment to excellence, we continuously strive to enhance our product. This latest version brings multiple improvements,...

AVEVA Point Cloud Manager uses 3D point cloud data—captured via LiDAR or photogrammetry or other methods—to create an accessible, detailed, secure digital twin. Perfect for brownfield, greenfield and maintenance projects, it ensures alignment between physical and digital assets to enhance decision-making, reduce rework, and improve operational safety. Available versions: 25.x , 24.x , 5.x ,… AVEVA Point Cloud Manager 5.7.0 Tested Picture AVEVA Point Cloud Manager Features Support the digital twin Secure and trusted reality capture data can be shared between engineering and operations teams in the web browser or supported 3D design applications, ensuring everybody works from a single source of truth. Intelligent point cloud with AI AVEVA Point Cloud Manager, when deployed through CONNECT, includes intelligent AI tools...

GEOVIA MineSched makes developing a tactical mine plan — a plan that turns the decisions defined in a long-term strategic mine plan into a schedule to guide day-to-day operations — breathtakingly easy by providing intuitive, rapid setup, and guided workflows that enable the creation of target-based, long- and short-term schedules from pre-created block and polygon models. Available versions: 2025.x ,2024.x ,… Geovia Minesched 2025 Tested Picture GEOVIA Tactical Mine Planner Produce practical and executable tactical mine plans from a long term strategic plan, for the optimal development and exploitation of the ore body. For open pit mines, accepts and schedules any number of pits For underground mines, supports scheduling of development advance as well as stope production Heuristic algorithms for...

Altair Feko is the leading tool for antenna design, placement and coupling, virtual test drives and flights, radio frequency interference, radar and radio coverage and planning, and spectrum management. Feko uniquely combines installed antenna performance with wireless coverage analysis, and its hybridized and parallelized solvers handle complex and electrically large analysis problems. Available versions: 2025.x , 2024.x , 2023.x , 2022.x , 2021.x , 2020.x Altair FEKO 2025.0 Linux64 Tested Picture Additionally, Feko offers specialized wave propagation technologies and models through its Altair® WinProp™ and Altair® WRAP™ capabilities. WinProp is especially useful for detailed, urban, and indoor radio-coverage planning, network roll-out, and comparative design deployment needed for heterogeneous outdoor-indoor scenarios. WRAP supports network coverage, planning, colocation, and interference analysis and...

POINTCAB 4AUTOCAD PLUGIN​ (PointCab Plugin for AutoDesk AutoCAD)Converting point cloud data and then importing it into AutoCAD is quite time-consuming. Once this is done, the laborious drawing and modeling on the point cloud follows. Available versions: 3.x , 2.x , 1.x ,… PointCab 4AutoCAD 3.0 Tested Picture Take a look at what functions our AutoCAD plugin has to offer: Connection with all main AutoCAD 2D functionalities Ability to transfer coordinates & distances Fixing and locking of axes while drawing Create connected lines, polylines, multilines & TIN surfaces Transfer from UCS to WCS Flatten heights in drawing Insert your own lisp scripts into our plugin (+ icons) Transfer Tool for layouts/sections Compatible with AutoCAD, version 23 -2026

POINTCAB 4REVIT PLUGIN(PointCab Plugin for Autodesk Revit) offers one of the most straightforward workflows for modeling point cloud data in Revit. Stay in your comfort zone and don’t worry about point cloud data anymore! Available versions: 3.x , 2.x , 1.x ,… PointCab 4Revit 3.0 Tested Picture In the tutorials below, we explain in detail how you can use the individual functions of our Revit plugin to your advantage. Of course, the quickest way to learn is to work directly in the software. Compatibility with Autodesk Revit 2024 No export/import of point cloud data necessary Direct transfer of objects Direct transfer of vector lines Direct transfer of 3D information Correct positioning of custom objects No navigating in the point cloud...

PointCab Origins is your Swiss Army Knife for the evaluation of point cloud data – no matter from which laser scanner and compatible with all CAD and BIM systems. From point cloud registration to the creation of vector lines and the transfer of your results into your CAD system, Origins offers you the perfect point cloud workflow. Available versions: 4.2x , 4.1x ,… PointCabOrigins Pro 4.2R18 Tested Picture Point cloud evaluation with PointCab Origins is that simple: Fast and intuitive: Create a digital measurement, floor plans and more with just a few clicks – without long training. High connectivity: Origins is compatible with almost all laser scanners and CAD & BIM systems. Scan2BIM workflow from a single source: From point cloud registration to...